Compatible with on-road, buggies, truggies and monster trucks running up to 6S LiPo batteries and weighing up to 15lbs (6.8kg)
Waterproof design allows running in nearly any environment
Profiles can be custom designed on a PC with the Castle Link PC programming software (software not included, can be downloaded for free from Castle's website, voucher is included for free Castle Link Programmer)
Solder posts allow battery wire length and direction to be easily changed
non-sensored
Input Voltage: 2S-6S LiPo BEC: Adjustable: User selectable between 5 and 7V, default 5.5V Brake: Proportional Reversible: Yes, may be disabled for racing Cooling Fan: 1.2" (30mm) removable Dimensions: 2.19 x 1.86 x 1.33" (56 x 47 x 34mm) Weight: 3.93oz (111.5g) without battery connector
In The Box
Mamba Monster 2 25V ESC with Cooling Fan
On/Off Switch
Fan Plug
Motor Wires
Receiver Wire with Connector and Instructions
Voucher for free Castle Link Programmer
Needed to Complete
The Mamba Monster 2 ESC is resistant to water, but it is not intended for continuous operation while submerged. If the ESC is operated in wet conditions, rinse with fresh water to remove dirt or corrosives and then fully dry the ESC. The ESC fan is not water resistant. Remove the fan from ESC before exposing the vehicle to liquids. Always check to see that the rest of the components in your vehicle can withstand getting wet.
