Limit straps are used to take stress off shocks and to control suspension extension. For example, when crawling up or descending steep grades, straps tied to the center of an axle are useful to limit the suspension from unloading and the vehicle from rolling, all while keeping suspension articulation intact.

Features:

Woven 2-ply Nylon fabric strap material
CNC machined aluminum clevis buckles

Compatibility

Axial AX10
Axial SCX10 I
Axial SCX10 II
Axial SCX10 III
Axial Wraith 2.2
Axial XR10
SSD Trail King
Vaterra Ascender

Specifications:
Length eye-to-eye: 100mm (3.94 inch)
Total length end-to-end: 107mm (4.21 inch)
Nominal strap size: 8x2.3mm (0.31x0.09 inch)
Eyelet hole size: 3.3mm (0.13 inch) for a 3mm screw

NOTE:

These straps are made from 200 lb. test nylon and offers minimal stretch to provide a consistent strap length and to protect against overextending shocks
Tested on extreme off-road terrain
Strap lengths are measured from the center of the mounting holes and are accurate to +/3mm
Recommendation: when ordering, choose a limit strap that is at least 5mm shorter than the shock to prevent full extension and possible breakage of shock